Республика Казахстан
+7 (7142) 75-35-57

TS-990S

Основные характеристики

  • Всеволновой мультирежимный трансивер
  • Мощность передатчика 200 Вт
  • Два независимых приемных тракта
  • Main RX -Преобразование c понижением частоты на всех диапазонах
  • Руфинг фильтры основного приемника 270Hz/500Hz/2.7kHz/6kHz/15kHz
  • Sub RX -преобразование с понижением частоты на диапазонах 15/20/40/80/160MГц (аналогичен приемнику TS-590S)
  • Руфинг фильтры дополнительного приемника 500Hz/2.7kHz
  • +40dBm точка IP3 RX
  • Два цветных TFT дисплея: сенсорный основной 7″ и дополнительный 3.5″
  • Встроенный блок питания
  • Три DSP процессора для обработки сигнала
  • Встроенный RTTY/FSK/PSK/QPSK кодер/ декодер
  • Четыре антенных разъема SO-239 , RCA разъемы RX I/O
  • Функция дисплея “Antenna Name” для каждого антенного порта
  • Разъемы для подключения внешнего монитора (DVI-I), антенного тюнера, телеграфного ключа, клавиатуры, внешних громкоговорителей
  • Стандартные разъемы “ACC-2”, “Remote”
  • 10MHz вход/выход тактового генератора (BNC)
  • Выход для подключения измерительного модуля (Jack 3.5 mm)
  • Низкоуровневый LF выход TX “DRV”
  • Оптический вход/выход
  • LAN порт
  • COM порт (9-pin)
  • USB порт : 2 x USB-A , 1 x USB-B

Комплект поставки

Кабель питания
Предохранитель 1 x 4A
Руководство пользователя
Разъемы 1 x 7-pin DIN
1 x 13-pin DIN

Amateur Radio General Features

10 MHz Reference I/O Port Selectable as Off, Input or Output. Impedance = 50Ω. Input level = 0dBm ± 10dB. Output Level = 0dBm
"Band Elimination Filter" Offers selectable-width notch function (300-1200Hz in 100Hz steps) with selectable attenuation (20 – 80 dB in 20 dB steps)
Built-in CW Keyer with Message Memories
Built-in Power Supply Switched Mode PSU
Built-in Voice Guide and Recorder Fully configurable guidance including operating status, SWR, TX power, menus.
Clock Two clock displays (local/time-zone) plus date. Can be updated from NTP servers via the LAN port
COM Port – D-sub 9-pin
Connectivity 10MHz Ref Clock Oscillator I/O (BNC)
External ATU port
Keypad (3.5 mm jack)
COM Port (Female 9-pin)
Straight/Paddle Key/External Keyer (6.3mm jack)
2 x USB-A & 1 x USB-B ports
"ACC-2" Data/audio connector
"Remote" linear connector
Analogue Meter (3.5mm jack)
"DRV" low-level LF drive (RCA)
Optical I/O
2 x external speaker sockets (3.5mm jacks)
DVI-I Dual-link video port
LAN port
Connector for External ATU
Connector for Remote/Linear Amp
CTCSS Encoder/Decoder Single-tone and cross-tone functions
Data Connection for External TNC
Digital Noise Limiter
Digital Optical Ports Input = 44.1/48kHz 16/24-bit
Output = 48kHz 24-bit
Dimmer Key – for displays and LEDs. 4 dimmer levels
Direct-access Band Buttons 10 buttons for Amateur bands 1.8 – 50 MHz plus 2 buttons for General Coverage. Up to 5 band-memories per button
Direct Frequency Entry
"DRV" Low Level Drive Output Terminal RCA jack – 1 mW output covers 1.8 to 50 MHz bands plus the 135.80-137.70 kHz LF band.
Dual Receive
DSP Devices 3 x Analog Devices Inc SHARC 32-bit DSP chips
for Main IF, Sub IF and Bandscope functions
DX Cluster Tune Function With compatible external Kenwood transceiver
Firmware Upgradeable via PC
Firmware Upgradeable via USB Port
Front Panel KeyPad
FSK Reverse Mode
Headphone Socket with Dual RX Output Main and sub-Band RX audio can heard either mixed, or separated to the left/right channels
High Frequency Stability Yes
Illuminated Front Panel Keys
Key Beep – adjustable + OFF
Key Lock Yes
LAN Port
Loudspeaker Socket Two external loudspeakers can be connected via 2 x 3.5mm mono sockets. Impedance range 4 – 8 ohms
Memory Channel Lock-out
Memory Channels with Alpha-tagging 120 Memory Channels
Memory Shift Function
Menu System for individual set-up Switchable between CONFIG A and CONFIG B. Can also be saved to USB stick
Microphone Socket 8-pin "Chrome" type
Monitor Function
Multiple Scan Functions
Mute Function
PC Radio Control Program (Option)
Power-On Message
Power-Off Timer Configurable, including Timed Audio Recording
Pre-amplifier Configurable per band
Pre-selector Configurable
Programmable Function Keys 2 Front Panel PF keys plus up to 8 external/mic keys
PSK31 Compatible
Receiver Hi-cut/Lo-cut DSP Slope Filters
Receiver Noise Blanker
Receiver Notch Filter Function
Remote Operation via the Internet ARHP-990 Software allows remote operation
Roofing Filter Equipped with 270Hz, 500Hz, 2.7kHz, 6kHz and 15kHz as standard, plus space for optional 6th filter
Screen Saver Yes, Configurable – two styles including 10-character text for callsign, name etc.
Sky Command 2 With compatible external Kenwood transceiver
Speech Processor
Sub Receiver Equivalent to TS-590S main receiver
TFT Colour Display 2 TFT displays. 7" main display with operating information, Bandscope, Waterfall and touch-screen tuning function plus 3.5" sub display with audio scope, PSK tuning meter etc. Selectable background colours. 4 different styles of S-meter presentation. Sub-display includes X-Y function (FSK) or Vector function (PSK)
Time-Out Timer
Transverter Display Function direct entry of transverter frequency
TX Audio Filter
TX Functions Speech Processor (Adjustable In/Out Levels). Changeable TX Filter Bandwidth. TX Audio Monitor. TX DSP Equalizer. VOX (Adjustable Gain and Delay Time settings). MIC Gain Control. CAR Level Setting. Adjustable Power Output.
TX/RX Equalizer
USB Port 2 x USB-A for flash drives/keyboard plus 1 x USB-B for PC connectivity
Variable LCD Brightness with Selectable Dimmer Four configurable settings
Video Display Port DVI port. Selectable 800×600 or 848×480 resolution
VOX Separately configurable for voice (SSB, FM & AM) or Data Mode. Adjustable Gain, Delay and Anti-VOX

Amateur HF Specifications

HF Output Power 200 W SSB/FM/CW/FSK, 50 W AM
50 MHz RF Output Power 200 W SSB/FM/CW/FSK, 50 W AM
5 W Minimum Output for QRP operation
A.C. Supply Voltage 220 – 240 V (50/60 Hz)
Antenna Impedance – 50 Ohm
Antenna Tunable Range (160 – 6 m Bands) – 16.7 Ohm to 150 Ohm
Audio Output Impedance – 8 Ohm
Audio Output Power More than 1.5 W (8 Ohm, 10% distortion)
Continuous RX: 30 kHz – 60 MHz Within spec – 0.13 – 30 MHz & 50 – 54 MHz
Current Drain (approx.) TX – 840 VA Power Consumption
RX – 200 VA Power Consumption
Frequency Stability ± 0.1 ppm 0 °C to +50 °C
Microphone Impedance – 600 Ohm
Modes A1A (CW), A3E (AM), J3E (SSB), F3E (FM), F1B (FSK) & G1B (PSK)
Notch Filter Attenuation Auto Mode – More than 60 dB
Manual Mode – More than 70 dB
Operating Temperature Range -0 °C to + 50 °C
Receiver Beat Elimination More than 40 dB
Receiver Circuitry Main RX – Double superheterodyne
Sub RX1 Down Conversion – Double superheterodyne
Sub RX2 Up Conversion – Triple superheterodyne
Receiver Frequency Range VFO Coverage = 30kHz – 60MHz
Main Band spec guaranteed = 0.13 – 30MHz/50-54MHz
Receiver IF Rejection Ratio Less than 70dB
Receiver Image Rejection Ratio HF – Less than 70dB
50MHz – Less than 60dB
Receiver Intermediate Frequencies Main RX – 1st IF 8.248 MHz/2nd IF 24 kHz (FM – 455 kHz)
Sub RX1 Down Conversion – 1st IF 11.374 MHz/2nd IF 24 kHz
Sub RX2 Up Conversion – 1st IF 73.095 MHz/2nd IF 10.695 MHz/3rd IF 24 kHz (FM – 455 kHz)
Receiver Selectivity SSB (LO:200/HI:2800 Hz) – More than 2.4 kHz @ -6 dB/Less than 4.4 kHz @ -60dB
CW/FSK/PSK (Width: 500 Hz): More than 500 Hz @ -6 dB/Less than 1.2 kHz @ – 60 dB
AM (LO:100/HI:3000 Hz) – More than 6 kHz @ -6 dB/Less than 12 kHz @ -60dB
FM – More than 12 kHz @ -6 dB/Less than 25 kHz @ -50dB
Receiver Sensitivity – 0.13 – 0.522 MHz SSB/CW/FSK/PSK = less than 0.5µV
AM = less than 6.3µV
Receiver Sensitivity – 0.522 – 1.705 MHz SSB/CW/FSK/PSK = less than 4µV
AM = less than 32µV
Receiver Sensitivity – 1.705 – 24.5 MHz SSB/CW/FSK/PSK = less than 0.2µV
AM = less than 2µV
Receiver Sensitivity – 24.5 – 30 MHz SSB/CW/FSK/PSK = less than 0.13µV
AM = less than 1.3µV
Receiver Sensitivity – 28 – 30 MHz (FM) Less than 0.22µV
Receiver Sensitivity – 50 – 54 MHz SSB/CW/FSK/PSK = less than 0.13µV
AM = less than 1.3µV
FM = less than 0.22µV
RIT Frequency Range ± 9.999 kHz
Transmitter Carrier Supression Less than -60 dB
Transmitter Frequency Response 300 Hz – 2700 Hz (within -6 dB)
Transmitter Modulation SSB/FM/AM = Balanced/Reactance/Low Power
Transmitter Spurious Radiation Less than -60dB
Transmitter Spurious Radiation – 50 MHz Less than – 66 dB
Transmitter Unwanted Sideband Supression Less than -60dB
XIT Frequency Range ± 9.999 kHz
Dimensions W x H x D = 460 x 182 x 449 mm including projections
Weight 24.5 kg

CW Features

Auto-Weighting, with adjustable manual fixed ratios
Built-In Memory Keyer
CW Autotransmit
CW Autotune
CW Pitch Control Adjustable 300 – 1100Hz
CW-Reverse Mode
Full Break-In/Semi Break-In
Iambic Modes A and B Built-in
Microphone Paddle Mode
Paddle Reverse Function
Side Tone Monitor
Terminal for CW paddle key
Terminal for straight key/external electronic keyer

Options

External Loudspeaker SP-990

Applicable Standards

CE Marked
R&TTE: 1999/5/EC
Factory Quality Certification and Location ISO 9001. Manufactured in Japan


Аксессуары